How do I hang my Minted art?

See simple, step-by-step instructions on how to hang your limited edition framed art that comes with easy-to-use hardware.

  • Hanging Wire
  • Corner Brackets
  • D-Rings
  • Sawtooth Bracket
  • Hanging Corner Brackets
Hanging Wire

Hanging Wire

Wooden frames 20” x 16” and smaller,
as well as most canvas art

  • Decide where you’d like your art. We recommend using masking tape and paper to find the perfect placement.
  • Mark your wall in pencil, at the top center of your art piece.
  • To determine the position of the nail or hook, turn your art over and measure the distance from the top of the tightened hanging wire to the top of the piece.
  • Measure the same distance, below the mark on your wall.
  • Firmly secure a nail, hook, or screw into a stud or anchor.
  • Hang your art!

Corner Brackets

Wooden frames 24” x 18” and larger

  • Decide where you’d like your art. We recommend using masking tape and paper to find the perfect placement.
  • Mark your wall in pencil, at the top center of your art piece.
  • Place the framed art over the corner brackets. For exact placement, find the center arrow on the left and right.
  • Determine the position and height you’d like to hang your art.
  • Pound in the hook and nail provided with the frame.
  • With a slight lifting motion, slide the frame to left or right to make any minor adjustments necessary to level the frame.
Corner Brackets
D-Rings

D-Rings

Metal Frames

  • Decide where you’d like your art. We recommend using masking tape and paper to find the perfect placement.
  • Mark your wall in pencil, at the top center of your art piece.
  • To determine the position of the nail or hook, turn your art over and measure the distance from the top of the D-rings to the top of the piece.
  • Measure the distance between the D-rings.
  • Apply these measurements to your wall, using your mark as a guide.
  • Firmly secure two nails, hooks, or screws into studs or anchors, leaving a ¼” protrusion.
  • Hang your art!
Sawtooth Brackets

Sawtooth Bracket

5" x 7" Canvas

  • Decide where you’d like your art to live. We recommend using masking tape and paper to find the perfect placement, based on the size of your art.
  • At the top of your art, mark the wall at the center part of your art piece in pencil.
  • To determine the position of the nail or hook, turn your art over and measure the distance from the top of the frame to the bottom of your sawtooth hanger.
  • Measure the same distance, starting at the mark on your wall.
  • Firmly secure a nail, hook, or screw into a stud or anchor.
  • Hang your art.

Hanging & Leveling Corner Brackets

Item 1
Place the framed piece over the brackets. Slide the frame to the left or right to make minor adjustments to level the frame.
Item 2
The bracket and nail do not have to be exactly parallel. The Sawtooth design will correct the variance.
Item 3
For exact placement, find the center arrow on left & right. Determine height. Pound bracket & nail. Hang picture.